Our drapes are pleated and lined, made ready to hang, in pairs (2 panels) that meet in the middle and secure with Velcro. Each pair of drapes come with two, 18″ x 6″ matching tie-backs.
Three and four panel options may be ordered, as well as custom cut-outs or steps for an additional charge.
For custom RV windshield drapes, measure the amount of track each panel will cover when closed. We will add for drape and fullness.
Wall Mount Curtains typically go on windows, they are flat, non-pleated and lined. Made ready to hang, in pairs, (2 panels) that meet in the middle and secure with Velcro.
Wall curtains come with Glide Tape sewn in along the top, one piece of wall mount track and a pair of matching tie-backs. If the window is at an angle, curtains can be ordered with Glide Tape sewn along the bottom for use with a bottom track, for an additional charge.
For custom RV wall mount curtains, measure the width by the length of the space you want to cover, not the window itself. We will add for drape and fullness.
Ceiling mounted, privacy curtains are flat, non-pleated and lined. Made ready to hang as a single panel or pair. They can be used to separate areas in your RV, create private spaces or used for bunks.
Ceiling curtains come with Glide Tape sewn in along the top, one piece of ceiling mount track and one matching tie-back. Bottom track is not required.
For custom RV ceiling mount curtains, measure the amount of track that each panel will cover when closed. We will add for drape and fullness.
Choosing Your Fabric
Introducing Dimensional Fabric August 2024
Select from 5 beautiful colors:
Our RV drapes and curtains are made ready to hang on your existing track when they arrive. We are happy to send out swatches of the colors and linings so you can make a great decision for your motorhome.
They are made from Dimensional Fabric that passes MVS-302 fire retardant testing approved for motor vehicles and comes in 5 colors – Island Sand, Desert Gold, Lake Blue, Canyon Gray, and Woodland Brown
Tie-backs can be ordered in a contrasting color for a customized, designer look.
Choosing Your Lining
While our standard curtain will darken your space naturally, for a full blackout effect, upgrade to Flametrol Lining instead of Caromar. Upcharge applies.
Choosing Your Carrier
Our windshield drapes will hang on your existing track. Choose the picture that shows how your current drapes attach to your track. Use this carrier number when you place your order. Please note, if you select 5, 6, 7, or 8, we will substitute 2, 3, or 1 and make your drapes with steel pin hooks.
*Special note about the #4 snap carrier and #9 glide tape. Double check the size of your carrier before you choose #4 or #9 attachment.
Although these two carriers look the same, they are not interchangeable. The vinyl tape they are attached to is sewn into the pleats of the drapes and requires extensive labor to change out. Please be sure to measure the size of your carrier to make sure you order the correct one.
The #4 snap carrier is 3/4” in size, and fits on 5/8” track, and the carrier can be removed from the tape. This carrier is more common on RVs made before 1990.
The #9 glide measures 1/2” in size and fits on 3/8” track. The carrier is permanently riveted to the tape and cannot be removed. This carrier is more common on RVs made in 1990 and newer.
Carrier choices are only offered on custom RV windshield curtains only. All wall and privacy curtainscome with the #9 glide tape sewn in, which fits the included top curtain track.
Measuring For Your New RV Drapes
Measuring for your new custom RV drapes is simple! Just find the type of curtain you want to order below, then follow the instructions and use one of our order forms to record your measurements:
Measurements should be given as width (side to side) by length (top to bottom) in inches.
Measure the driver’s side track from side to side. This is your driver’s side width.
Measure the passenger’s side track width from side to side. This is your passenger’s side width.
If you need a center panel, measure the section of center track from side to side. This is your center panel width.
Add all widths together to get your total track width.
Price is determined by total track width and length.
Note we’re asking for track widths, not finished widths. We know how much to add to make your drapes nice and full!
For drape length, measure from the top of your track down to where you want the drapes to hit. If you have existing drapes, measure their length from top to bottom.
For Custom RV Wall Curtains
Measurements should be given as width (side to side) by length (top to bottom).
Measure the space you want to cover from side to side. This is your width.
Measure the space you want to cover from top to bottom. This is your length.
For Custom RV Ceiling and Privacy Curtains
Measurements should be given as width (side to side) by length (top to bottom).
Measure the opening the curtain will cover from side to side. This is your curtain width.
For length, measure from the ceiling down to where you want the curtain to hit. For curtains that reach the floor or other surface, we recommend allowing a 1″ clearance at the bottom.
To request fabric swatch samples or more information regarding Coach Coordinates; request a quote today.
Request a quote from Gary Manufacturing to learn more.